Simple Guide to Replacing Different Types of Filters in Your Air Conditioner Yourself (Split Systems Tosot, Gree, Haier, Cooper&Hunter, Olmo, TCL, Daikin, Midea, Mitsubishi, Samsung)

Regular filter replacement is a key condition for maintaining the efficient operation of your split system and ensuring clean air in your home. Regardless of whether you have an air conditioner from Tosot, Gree, Haier, Cooper&Hunter, Olmo, TCL, Daikin, Midea, Mitsubishi, or Samsung, the filter replacement process is usually quite simple and does not require special skills. In this detailed guide, we will tell you how to replace the main types of filters yourself so that your air conditioner works at full capacity and the air remains fresh and healthy for you and your family in Kyiv and throughout Ukraine. In our online store Only-Spares, you can always purchase the necessary filters for your air conditioner model.

Preparing for Filter Replacement:

1. Turn off the air conditioner from the power supply for safety.
2. Find the manual for your air conditioner. It should contain information about the location of the filters and their type.
3. Prepare new filters of the appropriate type and size. You can find the necessary filters in our online store Only-Spares by specifying your air conditioner model.

Instructions for Replacing a Mechanical (Pre) Filter:

1. Open the front panel of the indoor unit of the air conditioner. Usually, you need to gently press the side latches or lift the panel upwards.
2. Locate the mechanical filters. They are usually located directly behind the front panel and look like plastic mesh.
3. Carefully remove the old filters. Remember or take a photo of their location for the correct installation of new ones.
4. Rinse the old filters under running warm water from dust and dirt if they are reusable. Let them dry completely before reinstalling (if you don't have new ones).
5. Install the new mechanical filters in their place, making sure they are in the correct position.
6. Close the front panel of the indoor unit.

Instructions for Replacing a Carbon Filter:

1. Open the front panel of the indoor unit of the air conditioner as described above.
2. Locate the carbon filters. They are often located behind the mechanical filters and may look like thin black plates or meshes.
3. Remove the old carbon filters. They are usually disposable and cannot be cleaned.
4. Install the new carbon filters in their place, following the correct orientation (if any).
5. Reinstall the mechanical filters (if they were removed).
6. Close the front panel of the indoor unit.

Instructions for Replacing an Antibacterial Filter:

1. Open the front panel of the indoor unit of the air conditioner.
2. Locate the antibacterial filters. Their location may vary depending on the air conditioner model (they may be behind the mechanical ones or separately).
3. Remove the old antibacterial filters. Check if they are disposable or reusable (information should be in the manual).
4. If the filter is reusable, carefully clean it according to the instructions (e.g., rinse under water and dry). If disposable, dispose of it.
5. Install the new or cleaned antibacterial filter in its place.
6. Reinstall other filters (if they were removed).
7. Close the front panel of the indoor unit.

Instructions for Replacing Other Types of Filters (Electrostatic, Photocatalytic, HEPA):

The replacement process for electrostatic, photocatalytic, and HEPA filters may vary slightly depending on the air conditioner model. General steps:

1. Open the front panel of the indoor unit.
2. Locate the corresponding filter. It may have a special mount or frame.
3. Carefully remove the old filter. Note its orientation.
4. Install the new filter, making sure it is in the correct position and securely fastened.
5. Reinstall other filters (if they were removed).
6. Close the front panel of the indoor unit.

Tips for Filter Maintenance:

• Regularly check the condition of the filters (at least once a month) and clean or replace them as needed.
• Follow the manufacturer's recommendations for the frequency of filter replacement.
• Use only filters that are suitable for your air conditioner model.

Replacing filters yourself is a simple way to maintain the efficiency of your air conditioner and take care of the air quality in your home. In our online store Only-Spares, you will find a wide selection of filters for split systems from Tosot, Gree, Haier, Cooper&Hunter, Olmo, TCL, Daikin, Midea, Mitsubishi, Samsung, and other brands at competitive prices with delivery in Kyiv and throughout Ukraine. Take care of fresh air and the longevity of your air conditioner with Only-Spares!

Tags: #ReplaceACFilters #DIYFilterReplacement #FilterReplacementInstructions #AirConditionerFilters #BuyFiltersKyiv #FiltersTosot #FiltersGree #FiltersHaier #FiltersSamsung #AirConditionerMaintenance #AirConditionerPartsKyiv #CleanAirAtHome #OnlySpares